Series 2300DV Torque Transfer Standards’ extreme accuracy and simple installation make them ideally suited for non-rotating calibration of production Torquemeters. Unlike mV/V output Transfer Standards, use of a mV/V Calibrator isn’t required, thus, its errors are avoided. Multiple bridges and elegant design provide high immunity to clamping and other extraneous loads. High Overrange avoids errors from clipped torque peaks. Furthermore, High Overload reduces the likelihood of damage from operator mistakes.
There are no pots, switches or other parts subject to misadjustment by unauthorized personnel or from vibration. Bidirectional remote cal verifies operation of the entire data chain in CW and CCW modes. Calibration is invoked via I/O line or from your computer. Hardening against electromagnetic interference generated by Variable Frequency Drives, ISM transmitters and other industrial noise sources further enhances performance. These devices have very high stiffness, low deflection and provide exceptional static and dynamic system response. They are installed without an additional coupling which preserves driveline stiffness, and yields a low overhung moment and a short overall length.
Included software interfaces with your Windows-based PC. That software displays Real-time, Maximum/Minimum and Spread Torque, can do Torque versus Time plots and store test results. You can select from 11 Bessel Response Filters and 10 Units of Measure without re-calibrating. Password protection may be invoked. Three performance grades are available.