Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BJM Submersible Shredder Pumps Prevent Blockages

BJM Pumps
BJM Pumps

BJM Submersible Shredder Pumps Prevent Blockages

The model SK submersible shredder pump from BJM Pumps LLC, can handle a variety of difficult municipal and industrial solids handling applications including sanitary sumps and controlling chemical wastes.

The advanced technology shredder pump design can eliminate line blockages while reducing capital and operating costs. The SK series shredder pumps are designed to “shred” soft solids and debris before pumping. The shredding action is produced using a unique FangTM non-clog cutting impeller, with integral Tungsten Carbide vane tips (referred to as “teeth”); against a high-chrome “scalloped” wear plate. The cutting teeth shred solids against the pump suction plate, continuously ripping the solids apart with 360 degrees shredding action. It works on many objects that would clog an ordinary “non-clog” pump. The hardened impeller / plate materials provide maximum wear resistance for long service life.

Hardened cast iron construction stands up to rough handling and pumping gritty water. The 304SS motor housing provides both superior corrosion and abrasion resistance and will not prematurely wear out like competitive models with aluminum motor housings.

The SK motor is shielded from the pumping media by a three seal design. Double mechanical seals and a separate lip seal provide unexcelled protection. The lower seal faces are made of silicon carbide/silicon carbide and the upper seal faces are carbon/ceramic. An additional lip seal has been installed above the impeller, to help prevent abrasives such as grit, from entering into the seal chamber. Winding protection and (NEMA) Class F motor insulation allow motor temperatures to rise to 239°F, superior to pumps with Class A and B insulation. An automatic thermal switch turns the pump motor off if the temperature and/or amp draw rises too high. When the motor cools the switch will automatically reset and the pump will turn back on.

The SK Series shredder pumps are available with hardened cast iron components which stand up to rough handling and pumping gritty waste water. Competitive pumps with soft resin impellers or plastic exterior components cannot hold up in these services. The SK is offered in stainless steel for added corrosion protection in chemical sump service. The SK is also available in an Explosion Proof version for use in Class I, Division 1, Groups C & D hazardous locations.

There are SK Models from 2” – 6”, from 1 -20 Horsepower, pumping up to 911 GPM, with heads to 101 feet. To see the shredder pumps in action visit http://www.bjmpumps.com/shredder-pump-videos/. Watch this impressive video showing the BJM shredder pump devouring solids such as gloves, rags, and even a real “roaster” chicken. For more information go to www.bjmpumps.com or contact your local BJM Pump representative.

BJM Pumps® is headquartered in Old Saybrook, CT and has been providing fluid handling solutions for industrial and municipal services since 1983. Over its thirty year history, BJM Pumps has grown quickly by supplying world class pumps and accessories, priced competitively, through its global network of stocking distributors in the United States, Canada and South America.

Related Articles

Related Whitepapers

Performance Prediction: A Unique Approach for the Aftermarket

Hydro’s software has allowed CFTurbo to improve the optimize the performance of equipment and its fit to its system to make dramatic efficiency and reliability…

Corrective vs. Preventive Maintenance: Which is Better?

Corrective Maintenance This is performed only after a failure occurs in the equipment, which can lead to unexpected downtime and costly repairs. Although it is…

Torque Sensors For Any Application

This guide from S. Himmelstein & Company details their torque sensor solutions, designed to meet the demands of any industry. Learn about: Ultra-Precise Spline Drive…

What is Water Hammer and Why It Is Important to Prevent?

Water hammer (or hydraulic shock) is the momentary increase in pressure inside a pipe caused by a sudden change of direction or velocity of the…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *