Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Modified Amerigear Couplings For Oil & Gas Truck-Mounted Pumps

Industry News
Altra Industrial Motion

Modified Amerigear Couplings For Oil & Gas Truck-Mounted Pumps

A leading oil and gas OEM needed a torque-dense disconnect coupling for pumps utilized at hydraulic fracturing sites. The truck-mounted pumps are driven by energy efficient electric motors instead of traditional diesel engines. The coupling is installed between a 5,000 HP motor, turning at 1,800 RPM, and the pump. The coupling allows the pump to be disconnected from the drive motor to prevent drivetrain damage during vehicle transport.

Ameridrives was contacted by the OEM’s consulting engineer to provide a coupling solution. After review of the application, Ameridrives supplied Amerigear FDC flexible gear couplings with a torque rating of 551,000 in.lbs. The flanged-sleeve, double- engagement disconnect couplings with shifting collars are designed to meet quick connection or disconnection application requirements. Units feature a high-speed synthetic rubber lip seal that allows for disengagement. The 16″ dia. couplings have a 6″ dia. keyed bore on the motor hub and a 5″ dia. keyed bore on the pump hub.

Fully-crowned gear teeth provide operational benefits including maximum loadcarrying capacity with minimum size, maximum reliability and long life. Optimum separation of gear meshes permits high parallel offset capacity.

Amerigear models compensate for all three types of misalignment. Units feature accurately machined medium carbon steel hubs and sleeves. Positive-type O-ring seals keep lubricant in and contaminants out. Seals are enshrouded to prevent damage.

Altra MotionHighlights

  • Flanged-sleeve, double- engagement disconnect couplings
  • 551,000 in.lbs. torque rating
  • 2,000 RPM maximum speed rating
  • Fully-crowned gear teeth provide maximum load- carrying capacity with minimum size
  • Accurately machined medium carbon steel hubs and sleeves
  • High-speed synthetic rubber lip seal allows for disengagement
  • Positive-type O-ring seals

Related Articles

Related Whitepapers

Arrow Powers Gas Turbine Analysis at Fern Engineering

Fern Engineering, Inc. was contracted by a major refinery to reduce the exhaust gas temperature variations of their gas turbine fleet. According to Hector Bourgeois,…

2027 DOE Efficiency Mandate & The Case for Higher Efficient Motors

The 2027 DOE motor efficiency requirements are bringing important changes to industrial motor applications. In this presentation, ABB’s Courtney Pickett and Stefanie Casimir break down…

ENKA Designs a State-of-the-Art District Heating System for Hamburg’s CHP Plant

Datacor Fathom provided the best solutions in terms of both heat transfer and pressure loss calculations.” – Kerem Algüzey, ENKA Industry: Power Generation Region: Hamburg,…

Refinery Cooling Water System Calibration Using Datacor Fathom

Hydrus Works, LLC needed to recalibrate a large refinery cooling water system containing nearly 600 pipes, 492 junctions, and 127 heat exchangers. Over 700 pressure,…