Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Stromag brakes for Hinkley Point C nuclear power plant

Altra Industrial Motion
Altra Fast reacting Stromag brakes ready for Hinkley Point C nuclear power plant

Stromag brakes for Hinkley Point C nuclear power plant

A pillar of the UK Government’s net-zero emissions strategy, two new nuclear reactors at Hinkley Point C are currently under construction by EDF Energy. To support the project, Stromag is delivering specialized brakes for multiple cranes at the site, including those that will lift radioactive uranium fuel rods from the very heart of the reactors.

Located in Somerset in the South West of England, EDF is constructing two European Pressurised Reactors (EPRs) at Hinkley Point C. Once complete, the third generation advanced pressurized water reactors will provide clean energy to approximately six million homes.(1)

The construction of a nuclear power plant is a huge undertaking requiring a wide array of construction equipment – especially heavy-duty cranes. Multiple crane OEMs supplying the project have enlisted Stromag to provide specialised braking systems, each designed to offer the performance and reliability required for this strictly regulated application environment.

A nuclear crane expert

Stromag is a global manufacturer of high-performance braking systems for cranes and hoists. A leading brand of Altra Industrial Motion Corp., the business has a proven track record in supplying braking systems for nuclear applications.

Michel Donnay, Plant Director of Stromag’s French facility in La Guerche Sur L Aubois, expands: “Our braking technologies are proven in nuclear facilities across Europe and Asia. We are very familiar with projects that involve the construction of this new generation of EPRs. Therefore, crane OEMs have approached us to provide brakes to support construction of the machinery and pumping stations at Hinkley Point C. However, the primary challenge was to specify multiple braking systems for the nuclear fuel transfer systems – the most critical cranes in the entire facility.”

Altra Fast reacting Stromag brakes ready for Hinkley Point C nuclear power plant

Stromag braking technologies are proven in nuclear facilities across Europe and Asia.

Lifting the reactor’s heart

Nuclear reactors rely on uranium fuel rods, inserted into the core, to generate heat via nuclear fission. However, like any fuel, the rods eventually become depleted and require replacement. This is carried out by a fuel transfer system inside the reactor building.

The system is comprised of heavy-duty cranes that lift out spent fuel rods from the reactor when it is offline. These rods are lowered into a separate cooling pond. Then, new fuel rods are inserted into the core and fission can restart. Lifting heavy, radioactive uranium fuel rods is an incredibly dangerous process, with power transmission components installed on the cranes required to offer incredibly high levels of reliability and redundancy.

At Hinkley Point C, this operation will be carried out by a huge circular crane located inside the reactor building, a so called a polar crane. Used once or twice a year, the crane is designed to have a lifting capacity of 300 tons. To ensure the crane stops with the maximum reliability and redundancy, the crane OEM selected Stromag to provide the service brakes and emergency brakes for the design.

Altra Fast reacting Stromag brakes ready for Hinkley Point C nuclear power plant

Stromag provided brakes, couplings, limit switches, hydraulic power units (HPUs) and monitoring systems.

Service and emergency brakes

“The crane in the reactor building requires two braking systems,” explains Jonathan Balland, Area Sales Manager at Stromag. “Service brakes carry out the normal braking operations for the crane when it is in use. These units are usually mounted on the high speed shaft. Emergency brakes are mounted on the drum and offer highly responsive stopping performance if the load falls for any reason.”

For service braking, Stromag specified its C range of electromagnetic disc brakes. Rated for over four million cycles in normal operating conditions, the electromagnetic design eliminates any risk of hydraulic fluid leakage, maximising reliability. The brake only opens when power is applied, staying closed otherwise. Once powered, only a small current is required to keep the brake open, which ensures low energy consumption in operation.

Hydraulic brakes are preferred for emergency braking applications due to the higher torque figure this configuration can achieve. While the world’s largest electromagnetic brakes can reach up to 10 tons clamping force, there is almost no limit to what hydraulic brakes can achieve, with some in mining applications reaching up to 100 tons of force. This exceptional performance is critical for the polar crane at Hinkley Point C, ensuring that the heavy radioactive fuel rods can be stopped dead. To meet these application requirements, Stromag specified SH hydraulic disc brakes.

“The key with the emergency brakes is to stop the load in the shortest distance possible. Our SH32 brake offers a 32-ton clamping force, but critically, with a closing time of less than 0.3 seconds. This ensures we can offer a reduced minimum distance of travel for the load if it begins to fall. For example, the braking systems may be required to stop 300 tons of load within 50 centimetres of travel.”

“For an application as critical at the polar crane at Hinkley Point C, we also had to offer extra clamping force to ensure the required redundancy, which we achieved by specifying multiple units. If a brake fails for whatever reason, another unit can provide the necessary performance to halt the load.” Jonathan adds.

In addition to the brakes, Stromag also supplied couplings, limit switches, hydraulic power units (HPUs) and monitoring systems.

Exacting standards

Stromag ensures the suitability of its braking systems for all customer applications thanks to rigorous testing and modelling. However, providing braking systems for the nuclear industry requires achieving the highest possible standards.

Michel says: “As a specialist in nuclear applications, we are accredited to the highest quality specifications. EDF has certified our applicable products as C3, which denotes suitability for use in all buildings at a nuclear power plant. We undertake customer surveys, independent consultations and assessments to define our critical steps and certify that all aspects of engineering work are carried out correctly. Typically, the quality documents we supply for products used on critical cranes in nuclear power stations can reach up to 1000 pages long.”

“We carry out all engineering work in-house at our facility in France, while offering our crane OEM customers technical support at their production facilities too. We are among a handful of companies worldwide who can provide these braking systems for critical nuclear applications.”

Read more about braking solutions from Stromag.

Related Articles

Related Whitepapers

Axial Flow Check Valves for Pumps and Compressors

Pumps and compressors are essential devices used in a wide range of industrial plants and buildings. They are the power source that make it possible…

Proven Seal Technologies for CO2 Capture and Supercritical Applications

Advanced seal technologies for CCUS and sCO2 applications support energy transition initiatives Companies increasingly are prioritizing energy transition initiatives to reduce greenhouse gas emissions known…

Accurate & Reliable Pumps for Lease Automatic Custody Transfer (LACT) Units

Hydra-Cell Seal-less Pumps provide accurate and reliable custody transfer of crude oil, produced water, and NGL’s. They feature a compact design, require minimal maintenance, and…

Liquefied Natural Gas [A Complete Flow Control Portfolio]

Liquefied natural gas (LNG) will play a pivotal role as companies transition from coal and oil to cleaner energy sources during renewed efforts to significantly…

Comments

Leave a Reply

Your email address will not be published.

Join the #PumpTalk Community


By submitting this form, you are consenting to receive marketing emails from: Empowering Pumps & Equipment, 2205-C 7th Street, Tuscaloosa, AL, 35401, http://www.empoweringpumps.com. You can revoke your consent to receive emails at any time by using the SafeUnsubscribe® link, found at the bottom of every email. Emails are serviced by Constant Contact