Loading Events
Find Events

Event Views Navigation

Upcoming Events

Events List Navigation

June 2018

AFT Fathom, Impulse and Arrow Training

June 4 @ 8:00 am - June 8 @ 5:00 pm
Applied Flow Technology Office, 2955 Professional Pl #301
Colorado Springs, CO 80904 United States
+ Google Map
AFT

Mon Jun 4th - Fri 8th (MDT) Training-Seminar Applied Flow Technology Office, 2955 Professional Pl #301, Colorado Springs, CO 80904, USA map directions   AFT Fathom: June 4-5, 2018 8:00 a.m. - 5:00 p.m. Lunch is included AFT Arrow: June 6-7, 2018 8:00 a.m. - 5:00 p.m. Lunch is included AFT Impulse: June 6-8, 2019 8:00 a.m. - 5:00 p.m. Lunch is included Applied Flow Technology seminars are the best way for users to acquaint themselves not only with the software, but with helpful tips and tricks to…

Find out more »

Centrifugal Pump Fundamentals

June 5 @ 8:00 am - June 8 @ 5:00 pm
Flowserve Irving, TX + Google Map
$1785.00
Flowserve

This course provides the student with a thorough understanding of centrifugal pump design, function and operation. Common process control and performance measurement methods are reviewed, and the necessary calculations associated with pumping systems are executed and explained. Centrifugal pump issues are discussed in the classroom and then reinforced in the laboratories using actual pumps equipped with instruments that indicate flow, pressure and power consumption as the pumps are operated by the students themselves. 65% classroom, 35% laboratory. Specific topics include:…

Find out more »

Pump and Mechanical Seal Reliability

June 5 @ 8:00 am - June 8 @ 5:00 pm
Desio, Italy
Flowserve

This course provides the participant a better understanding of the reliability issues related to the interrelated functions of the centrifugal pump and mechanical seal, as they are operated in a complex pumping system under a variety of conditions. Participants learn how to identify and address causes of poor pump and mechanical seal reliability by focusing on mechanical and operational issues that can negatively affect pump and seal performance. Basic pump and mechanical seal issues are discussed in the classroom, and…

Find out more »

Root Cause Analysis

June 5 @ 8:00 am - June 7 @ 5:00 pm
Vancouver, WA Vancouver, WA United States + Google Map
Flowserve

This course provides participants with an in-depth procedure for performing a root cause analysis using a logical cause mapping techniques. After learning these techniques, students will work in teams of 4-6 members to endeavor to identify problems, and after applying the RCA process, ultimately recommend solutions to various pump and seal failures presented in several cases studies. 60% classroom, 40% team exercises. Specific topics include: The necessity and purpose of RCA Problem identification and classification Traditional methods of cause and…

Find out more »

Engineered Overhung Pump Repair (Formerly SSPR)

June 5 @ 8:00 am - June 7 @ 5:00 pm
Pasadena, TX Pasadena, TX United States + Google Map

This course will provide participants with the knowledge and skills needed to evaluate failure modes and repair API 610 overhung process pumps. A Basics Level course for maintenance staff. This course will provide participants with the knowledge and skills needed to evaluate failure modes and repair API 610 overhung process pumps. The course is comprised of approximately 40 percent classroom and 60 percent laboratory time. Concepts and theory are taught in a classroom setting and then reinforced with hands-on exercises.…

Find out more »

AFT Impulse’s Pulsation Frequency Analysis

June 6 @ 10:00 am - 11:00 am
AFT

Wed Jun 6th 10:00am - 11:00am (MDT) Webinar Acoustical frequency analysis has always been a very well-kept secret by specialized companies; AFT Impulse's Pulsation Frequency Analysis (PFA) Module will give AFT Impulse users a comprehensive access to this technology. Join us in this webinar and learn how to use this new powerful tool. Register Here

Find out more »

NFPA

June 11 - June 14
Mandalay Bay Convention Center Las Vegas, NV + Google Map
NFPA

The NFPA Conference & Expo® is one of the world’s biggest and most comprehensive fire, electrical, and life safety events. It's an opportunity to gain valuable insights, meet with industry experts and learn about new products and solutions. The National Fire Protection Association (NFPA) will host its annual Conference & Expo at Mandalay Bay in Las Vegas, June 11 – 14. This comprehensive event brings together thousands of the industry’s leading professionals who will attend more than 110 educational sessions and special events addressing the latest issues, challenges and trends in…

Find out more »

5 Day Motor Circuit Analysis and Electrical Signature Analysis Seminar

June 11 @ 8:00 am - June 15 @ 5:00 pm
Copenhagen, Denmark Copenhagen, Denmark + Google Map
ATP

Course Type: Public Classroom Course Number: 10012 Three days of MCA™ (De-Energized) training prepares you to troubleshoot all types or electric motors, coils, and windings. Two and a half days of ESA (Energized) training prepares you to evaluate many types of electric motor systems to improve the reliability and uptime of your plant. This public course is appropriate for both supervisors and technicians. Course materials include Workbook, Motor Circuit Analysis Manual and Pattern Recognition. Breakfast and Lunch are provided each day. Course…

Find out more »

ACE 18

June 12 - June 14
Mandalay Bay Convention Center Las Vegas, NV + Google Map
AWWA ACE18

EXPLORE THE IMPACT OF INNOVATION ON THE FUTURE OF WATER ACE18 is set to inspire and connect the water sector with innovative solutions and new insights to help solve our global water challenges. This year AWWA is co-partnering with the California/Nevada Section to produce an outstanding conference. Don’t miss your chance to soak up the knowledge of hundreds of water industry thought leaders providing guidance on the future of our water. Register Here

Find out more »

Pump and Mechanical Seal Principles

June 12 @ 8:00 am - June 15 @ 5:00 pm
Irving TX Irving, TX United States + Google Map
Flowserve

This course provides the participants with the knowledge and skills needed to understand the basics of pumps, pumping systems and mechanical seals. The course curriculum is centered on centrifugal pumps and the mechanical seals that they utilize in common industrial applications. Basic pump and mechanical seal composition and operation are discussed in the classroom, and then reinforced in the laboratories using actual pumps equipped with instruments to indicate flow, pressure, temperature, and power consumption. The pumps are operated by the…

Find out more »
+ Export Events