Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

EUROPUMP Guidelines on Pump Vibration Standards

Industry News

EUROPUMP Guidelines on Pump Vibration Standards

“Customers, standards organisations and our industry have been waiting for these guidelines for a long time. I am pleased to say that they are now finalised and publicly available” says Jean-Claude Bouricet, Chairman of the Europump Technical Commission. “The guidelines will help customers choose the right standards for the right application and consequently lower the cost of pumps by avoiding over-specification,” he adds. “I am grateful for the support of the Committee members and I especially would like to thank John Bower who did a tremendous job in drafting these guidelines”.

Standards can appear to be conflicting in that they present machine vibration limits in different ways and with different limiting values. The guidelines present the essential points of each standard applicable to the pump industry and explain where each one tends to should be used. The diversity of standards is probably greater on the subject of vibration than in any other field.

Customers of pump manufacturers now have a useful tool to choose the right standard for the right application. This will enable them to match needs and pumps and thus achieve the best cost/benefit ratio.

Europump stresses that the guidelines are not an alternative to studying the full content of the standards with which compliance is required. In addition the guidelines are a summary and do not contain all the conditional statements and explanations which are in the standards. Europump recommends liaising with national standards organisations.

 

Where to find the guideline: http://europump.net/publications/guides-and-guidelines

 

 

 

Related Articles

Related Whitepapers

Design Optimization of Jet Fuel Pump for Aviation

Jet fuel pumps play a critical role in the safe and efficient operation of commercial aviation. The performance and reliability of these pumps directly impact…

The Cost Of Downtime In Manufacturing [Infographic]

Downtime can be the most expensive element of any manufacturing operation. Here are some important facts and tips you should know to cut down on…

AFT Fathom used to Model Central Heating Cycle of a State-of-the-art Combined Heat and Power Plant

Kerem Algüzey, design engineer at ENKA Insaat ve Sanayi A.S., used AFT Fathom to simulate the central heating cycle to inform the design of the…

Driving Energy Savings a Commercial Facility Energy Upgrade Project

Upgrading to Design Envelope pumps helped GAC save energy costs of 20,000 AED in the first year. Armstrong’s Pump Manager service provides reports and notifications…

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *